I've never heard of anyone discussing or attempting what you are asking..
As far as the mono shock, wouldn't that have one end attached to the rigid frame, and the Magna would not have a point for that, So that would have to be welded in, IF the geometry was correct.
The VLX swing arm is set up for a spoke wheel, so I'm not sure what alignment differences there would be (Spacers, etc) to align the wheel with the front sprocket. Also not sure what the maximum tire width is on the rear of the VLX, so would that limit what size rear tire you could run?
I do know that much of the front end is shared between the 2 bikes. There are obvious differences (front fender) because again, the VLX has narrow (and I believe taller) wheel over the Magna front wheel..
Keep us update if you decide to attempt this.
« Last Edit: February 08, 2019, 03:11:57 AM by hootmon »
"accidents aren't predictable, don't be a DUMBASS" - MD Dan