Custom Headers for MAGNA 1996 VF750C

[Instructor50]

Okay,

I did the exhaust modification on the MOOT tips & tricks section and it just isn't loud enough still.  I don't live in an area where neighbors would be affected by the noise so I really want to do some custom headers for this thing.  

I think I have a shop that can do it but they didn't seem to confident on the jet kits.

First of all would a Jet Kit be enough to compensate for the headers?

Secondly, has anyone gone this route already that could give some input?

I'm not living in Texas right now as I am in the military but ideas would help me to get something going up here.

Thanks guys,

Instructor50
USAF

[Greg Cothern]

One thing to take into consideration is that the muffler mod on the site is really a removal of a resonator and not a baffle.  The baffle is further up inside the muffler housing.
I have long thought about finding a long bit to reach the actual baffle and drilling it, as I feel confident that it would make them deeper and louder.
As far as jet kits and such compensating for building a new set of headers, well there is a big bit of mystery.  You would need a analyzer to get an idea of how close then its hit or miss from there.

[silveradocowboy]

I have long thought about finding a long bit to reach the actual baffle and drilling it.

How long and what size?

[Greg Cothern]

Jeff, I have not actually measured hehehehehe.  I have to catch Devin and measure his muffler.

[Greg Cothern]

That is unless we have someone with a wrecked set that wishes to donate them for some disection hehehehehe.

[DC Smith]

Instructor50,
Have you tried taking the end plates off completely?  When I bought my 2000 the end plates had been removed and it was very loud.  Might try that.

[Instructor50]

Have you tried taking the end plates off completely? When I bought my 2000 the end plates had been removed and it was very loud. Might try that.

Does what Dan is suggesting require a jet kit?[/quote]

[Greg Cothern]

I personally do not recommend removing the end plates completely.  But it would require shims at a minimum and more than likely jets as well.

[HardDriveUSA]

If yall help me with a new set of pipes...

My pipes arent in bad shape, but once I get the money I will have a spare set of stock pipes.  

[rjb/AKA Bob Barram]

Charles, from Texarkana, has a set of stock pipes for a 3rd gen for sale. Is that what you are looking for?