Dyna 3000 for Magna - No more!

[Lurkin]

I was considering a Dyna ignition for my Magna, but after looking around, then calling Dyna, they are no longer making them.

If you can find one, good luck, as I suspect very few dealers/distributors actually stocked them.

Rod...

[Sledge Hammer]

Was there any particular advantage of the Dyna ignition over the stock set-up?

[Lurkin]

Better timing curves, several to choose from, settings for rpm cut-off.

[L J VFR]

Well, there goes that idea!      Maybe Chad will sell his...

[KTC]

if they stopped making them, who makes them now?

[Lurkin]

That would be, NoFreakingBody Inc.

[dgc67]

Now THERE is something for the electronic gurus on here to make!

[lragan]

Now THERE is something for the electronic gurus on here to make!

If it were profitable to manufacture and offer this module, it would not have been discontinued.  Think I will pass...

[KTC]

guess thats how it goes.

[Chad in Michigan]

Maybe somehting like this can be modified to work.. not sure but it's a thought.. also, make sure to check other distributors, like bikebandit, phat perfomance, etc. they make old stock that they want to get rid of.

http://www.dynaonline.com/skins/products/automotive/arc_2/

[Lurkin]

Chad, thanks for the input.  I wasn't even sure if I wanted a Dyna, as the standard Magna power is definitely good.  But something happens to me when I'm told I can't have it !   I had to find a Gunfighter when I found out that those were only being made to-order....

I did check several suppliers, Phat, CruiserCustomizing, Dennis Kirk, and several other googled dealers.  Also checked a few of the distributors from Dyna's web site, and emailed a few eBay vendors.  As I had suspected, no one stocked any Magna Dyna's, they all ordered from Dyna as needed.

As for the other dyna product, I don't think I want to go quite that far.  Thanks for the tip though.

BTW, I think I have bought one from one of the members of the other Magna forum.

Rod.

[Jumbobret]

Then what is this?

http://shop.ebay.com/?_from=R40&_trksid=m38&_nkw=v65+dyna&_sacat=See-All-Categories

[KTC]

..

[Lurkin]

> Then what is this?
>
> http://shop.ebay.com/?_from=R40&_trksid=m38&_nkw=v65+dyna&_sacat=See-All-Categories

I should have been clearer in my original post.  This is a Dyna 3000 for the 3rd Gen Magna (94-03). 

[Jester]

I thought Dave Dodge has some ignition module for the 3rd gen magnas...could be wrong of course..