Dyna Beads/balance tires

Started by rjb/AKA Bob Barram, January 16, 2009, 03:06:52 PM

Previous topic - Next topic

rjb/AKA Bob Barram

Has anyone seen this done before?
Tiny beads used to balance your tires instead of the lead pieces put on the outside rim.
http://www.innovativebalancing.com/service.htm
It can be done with a new tire or inserted through the valve stem on an existing tire.
MOOT#69
Prov. 3:5&6

dgc67


hootmon

Curtis has used this.. I would wait for his review, but I think he is a big supporter..
Here is an example video.

http://www.youtube.com/watch?v=eq263AYgyYg

I am planning on using this when I put on my car tire.. (DarkSide)
"accidents aren't predictable, don't be a DUMBASS" - MD Dan

Curtis_Valk

Bob, how did you miss the Dyna Bead discussion a few months back?  It's all there.  I've got them in one Valk, the other tire didn't need any weight.  I have no comparison info though because I didn't check the balance on the second car tire, just dumped in the beads.

One tip though, if you add them through the valve stem pour them s l o w l y so that they go in single file or they will bridge and not go in.

Curtis
Rowlett, TX MOOT #315 VRCC #26023
States I've Ridden



No need for a reason other than the journey.

rjb/AKA Bob Barram

Well, guess who is behing the curve....
I guess I better wake up.
MOOT#69
Prov. 3:5&6

lragan

I have to admit that I don't understand how these little beads can work.   I don't challenge that they do, I just don't get it.  Probably why I am not a mechanical engineer, but intuitively it just looks to me as though they would roll to the point of maximum excursion from the center as a result of the distortion in the tire and centrifugal forces, and make the imbalance worse, not better.

Would BB's work as well?  Or are they made of magic fu-fu dust or something?
Lawrence
'96 Blue Austin TX
Ride to Live, Live to Ride longer Wear a Helmet

Curtis_Valk

Quote from: lragan on January 18, 2009, 03:14:05 PM
Would BB's work as well?

BBs would work to balance the tire, however they may fail for other reasons (corrosion, grinding themselves to dust, etc...).  When I was first researching these, my thought was exactly as yours as to how they would work.  Evidently it has more to do with harmonics than the maximum excursion from center.  Another one of those counter intuative circumstances, I guess.

Curtis
Rowlett, TX MOOT #315 VRCC #26023
States I've Ridden



No need for a reason other than the journey.

TLRam1

Quote from: lragan on January 18, 2009, 03:14:05 PM
I have to admit that I don't understand how these little beads can work.   

Normally I get this stuff but still don't understand how they work.
Terry

My mama always told me never put off till tomorrow people you can kill today.

Allen, TX.

74 GT750 - 75 GT380 – 01 Magna - 03 KX 250-01 – 04 WR 450 - 74 T500 Titan