Main Menu

battery

Started by rjb/AKA Bob Barram, February 01, 2009, 09:57:01 AM

Previous topic - Next topic

rjb/AKA Bob Barram

When I put a new after market battery in my Rocket I had to change the terminal cables from the back to the front because the + - were on the wrong side of the battery. Well the + side was too close to the frame and inspite of the post protection I hit a bump and the frame made contact with the post and cooked the battery. Thankfully all that happened was the cooked battery, got a new one installed thanks to Allen and his transportation support!
MOOT#69
Prov. 3:5&6

roboto65

Just Glad we did not have a Rocket Barbecue and of course glad to help a friend anytime !!!!!  And we got to watch some crazy flying LOL  So all the electrics are acting right Bob?
Allen Rugg 
76 Jeep CJ

The adventure begins where your plans fall through.

TLRam1

What did you do different to prevent a recurrence?
Terry

My mama always told me never put off till tomorrow people you can kill today.

Allen, TX.

74 GT750 - 75 GT380 – 01 Magna - 03 KX 250-01 – 04 WR 450 - 74 T500 Titan

rjb/AKA Bob Barram

The new battery has the terminals in the correct position. If I had to do it again I would put a solid piece of rubber between the terminal wire and the frame. The plastic that was there around the terminal wire lasted about a second, I imagine. It was not rubbing but it was close enought that when the big bump came it hit.
MOOT#69
Prov. 3:5&6