renew air filter

hootmon · March 10, 2011, 09:14:03 PM

Quote from: Greg Cothern on March 10, 2011, 08:58:56 PM
might need a gentle reminder via txt message or such....

I could only send you an e-mail as I don't have a # for you Greg..
Check Your e-mail...

TLRam1 · March 10, 2011, 10:39:04 PM

Quote from: hootmon on March 10, 2011, 09:14:03 PM
Quote from: Greg Cothern on March 10, 2011, 08:58:56 PM
might need a gentle reminder via txt message or such....
I could only send you an e-mail as I don't have a # for you Greg..
Check Your e-mail... Should be-----Checks in the mail.

Fixed it Hoot.

One day you guys are going to learn I pay the master lots of money for these privileges.

yellow_magna · March 11, 2011, 03:35:47 PM

Hi again,
Thanks for the welcome guys, and thanks LImagna for the info & the service manual download, will help a lot, will post some pic's of my bike soon, just want to get on the beast & ride, but the weather here in the uk ain't good at the mo, speak soon, thanks again.
keith.

hootmon · March 11, 2011, 04:47:03 PM

Hey Keith...
Sorry about the

LIMagna · March 11, 2011, 05:33:26 PM

Hoot, I think I've got two or three of the o-rings. I don't have the washers since I reused those but I'm pretty sure the bag of parts I just pulled out has a couple of those o-rings in there. If you send me your mailing address, I'll pop them in an envelope and send them out.

Greg Cothern · March 11, 2011, 06:16:41 PM

I have seen several times the little washer and o-ring stay in the carb housing when jet is removed. I use the little straw like from a can of wd-40 or such to wiggle around to get it too drop without loosing them.

You think its possible they are still in there?

LIMagna · March 11, 2011, 07:32:58 PM

I asked the same thing Greg but Hoot's pretty sure they weren't stuck up in there. I've got a couple of the little o-rings that I can send him but I don't have the washers since they weren't part of the gasket kits that I purchased.

hootmon · March 11, 2011, 10:15:08 PM

Charlie
I'll send you my address via PM.. Thanx.. I think If Greg can't find any washers, I have a better chance of finding the washers than the o-rings..
I think I have 2 o-rings installed, so IF you don't have 4, I should still be alright..

Greg Cothern · March 14, 2011, 12:18:27 PM

Will be in the garage later this afternoon and will dig the carb box out. If you have seen my garage lately you will understand how big a feat this will be! LoL

hootmon · March 14, 2011, 01:47:41 PM

Thanx Greg.. I resemble your remark about the garage..