recommendations for spark plug wire set - 3G

[iceprizm]

While I was pulling the boot from my spark plug the wire broke off from the boot. 
Inside the boot and the end of the wire was totally corroded, so its time for some new wires. Wondering what type or brand anyone would recommend.

[tedkraus]

I replaced mine with the a set from the dealer. I do not remember how much they cost, however I feel it was reasonable and worth it. Let us know if you find a good aftermarket replacement. 

[MagnaMikeD]

Cut the bad part of the wire off and "screw" the boot back on the wire.  A little silicone on the outside of the wire will help greatly.  Hopefully you have enough length. I've done this until I ran out of length of wire needed or resistance measurement out of spec.  I then stayed with stock wires and ordered them from BikeBandit.com.  It wasn't cheep but I was assured of not changing the recommended resistance specifications.

[tedkraus]

Magnamike, sounds right on give that a try if no luck. hdlparts.com is another good place to look for parts.