My turn signal switch came off today.

Magnum Magna · May 28, 2012, 04:19:45 PM

I need to stop riding with the Patriot Guard Riders. It seem like every other ride something bad happens. LOL Getting on the highway something fell off the handlebars. Went to stop the turn signal and **** no turn signal switch button. All the way to the event the left blinker was flashing. Got there took the bracket off to get the blinker to stop. Got home looked on the Internet for the part, the only thing I can find is the full assembly costing 107.00.
06 SWITCH, TURN SIGNAL
35200-MZ5-671 001 $115.53 $106.29

http://maximhonda.reachlocal.com/?scid=1857622&kw=12648322&pub_cr_id=7732470581

hootmon · May 28, 2012, 04:52:06 PM

Try pinwallcycle.com . I've purchased several used Magna parts from them...
They have one ebay for 24.95 +11.33 shipping
In the search box, put in 130689541186

Magnum Magna · June 05, 2012, 10:38:40 PM

Ordered the part today. Got a new one, it will be nice to start using the push to stop the flashers again.
The push to stop did not always work. You had to push it hard for it to work. So normally I would slide it back to the middle.

hootmon · June 05, 2012, 10:43:26 PM

Quote from: Magnum Magna on June 05, 2012, 10:38:40 PM
Ordered the part today. Got a new one, it will be nice to start using the push to stop the flashers again.
The push to stop did not always work. You had to push it hard for it to work. So normally I would slide it back to the middle.

I had the same issue, took it apart, cleaned it, and re-greased it, and all was good..

Magnum Magna · June 07, 2012, 02:51:08 AM

Got a call today that the part is now on back order.
Next week hopefully. Hope to get the clutch cable next week also.

Magnum Magna · June 20, 2012, 01:35:30 PM

Got the new left controls put on. If anyone is interested in the old controls let me know.
It looks like it could be patched to have a back up or parts to try to replace the horn or high/low light controls.

I am interested what the two wires pluged in the the clutch lever controls are for.

TLRam1 · June 20, 2012, 03:16:19 PM

Quote from: Magnum Magna on June 20, 2012, 01:35:30 PM

I am interested what the two wires pluged in the the clutch lever controls are for.

Probably the safety switch, when in gear the bike will not start without the clutch pulled in.

Magnum Magna · June 20, 2012, 07:51:15 PM

That was the only thing I felt like it could be.

Greg Cothern · June 21, 2012, 08:18:58 PM

Terry is correct, its the safety switch.