Go Down Skip to main content

Author Topic: Final batch of 3rd gen centerstands

M
  • *
  • Honorary MOOT Member
  • 2nd Gear Contributor
  • Posts: 327
    • http://www.cycle-istic.com
Final batch of 3rd gen centerstands
OP: November 28, 2016, 05:15:13 PM
I had already decided that this would be my last batch of centerstands, as they are just too troublesome and costly to make for very little profit.

And now my cancer has progressed to stage 4, so I need to start winding down anyway. I will have 10 centerstands this week, so anyone who wants one should watch my webpage http://www.cycle-istic.com/centerstands/ and place an order immediately upon seeing my notice that they are ready. There are only 10, and there will be no more.

If anyone out there is a fabricator/welder, and would like to take on the job of making them in the future, I have the fixtures and they are available.  -- Dobie
  • IP logged
If you can read this, thank a teacher. For reading it in English, thank a veteran.
Age is a state of mind, I'm way past 60, going on 24.

  • *****
  • Administrator
  • 4th Gear Contributor
  • Posts: 965
Re: Final batch of 3rd gen centerstands
#1: November 28, 2016, 07:12:48 PM
Thanks Dobie.  And I'll keep you in my prayers.
  • IP logged
Jesse
Moot #358
'99 Magna (Halloween theme paint job)
Racetech Cartridge Emulators in front forks, Progressive 444s on the rear. Best mods I've ever made to this bike.
Houston

  • *****
  • MOOT Member
  • 5th Gear Contributor
  • Posts: 1159
  • MOOT Website/Forum Sponsor
Re: Final batch of 3rd gen centerstands
#2: November 28, 2016, 07:40:40 PM
You are in my prayers.
  • IP logged
MOOT#428
Arlington, Texas
I'm not young enough to know everything

  • *
  • Honorary MOOT Member
  • MOOT Super Contributor
  • Posts: 4312
  • '94 Red Magna, '02 Black Magna
Re: Final batch of 3rd gen centerstands
#3: November 28, 2016, 08:33:25 PM
Will the center stand lift the bike enough if you have a 170 tire on the bike.. I know it doesn't lift it much and the 170 is a taller tire..

Can you post it here when you about to release them to the website?

I am sorry to hear that things are NOT going well.. I will keep you in my prayers..
  • IP logged
"accidents aren't predictable, don't be a DUMBASS" - MD Dan

L
  • **
  • MOOT Member
  • 2nd Gear Contributor
  • Posts: 385
Re: Final batch of 3rd gen centerstands
#4: November 29, 2016, 12:45:09 PM
His stands work just fine with a 170.  It's easier to get up on the stand with the 170 actually and you have plenty of tire clearance off the ground when it's on it.
  • IP logged

  • *
  • Honorary MOOT Member
  • MOOT Super Contributor
  • Posts: 4312
  • '94 Red Magna, '02 Black Magna
Re: Final batch of 3rd gen centerstands
#5: November 30, 2016, 05:49:08 PM
His stands work just fine with a 170.  It's easier to get up on the stand with the 170 actually and you have plenty of tire clearance off the ground when it's on it.
Thanx
  • IP logged
"accidents aren't predictable, don't be a DUMBASS" - MD Dan

M
  • *
  • Honorary MOOT Member
  • 2nd Gear Contributor
  • Posts: 327
    • http://www.cycle-istic.com
Re: Final batch of 3rd gen centerstands
#6: December 04, 2016, 12:49:42 PM
Well, I was able to get 5 center stands shipped before they put me in the hospital again. I will be here a few more days before I can go home and ship the other 5 units. There are a half-dozen people who will be disappointed, as their orders were placed after the last unit was already ordered. I'm using my laptop from the hospital and my business program isn't on it, so I have to wait to get home to my desktop. I will update everyone involved by email.
  • IP logged
If you can read this, thank a teacher. For reading it in English, thank a veteran.
Age is a state of mind, I'm way past 60, going on 24.

 
Go Up