REMOVING REAR FENDER

Started by BIGPOPPALUMP, December 10, 2006, 09:42:43 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

BIGPOPPALUMP

December 10, 2006, 09:42:43 AM
I AM TRYING TO REMOVE MY REAR FENDER SO I CAN GET MY TINS PAINTED.  FOR SOME REASON I CANT FIND THE RIGHT SOCKET TO GET INTO THE 4 SIDE BOLTS.  IS IT A SPECIALTY TOOL? HELP

THANKS!

JEREMY

MagnaMan

#1
December 10, 2006, 11:08:10 AM
Do you have a 3rd generation Magna?  

If so you just need a socket and wrenches. I think 14 or 12 mm and and wrench for the acorn nuts inside the fender. After the four bolts I think there's a few more but can't remember as it's been over a year since I've done that.

Welcome to Moot!
Jesse
Moot #358
'99 Magna (Halloween theme paint job)
Racetech Cartridge Emulators in front forks, Progressive 444s on the rear. Best mods I've ever made to this bike.
Houston

BIGPOPPALUMP

#2
December 10, 2006, 11:11:45 AM
IT IS A 96 MODEL.  WELL THE BAD THING IS THE SOCKET WON'T FIT IN THE HOLE ON THE PASSENGER SEAT GRAB BARS.
Print
Go Up Pages1
User actions