Hey guys,
What tool(s) are needed to install a chain? I've heard mention of a chain press, rivet tools, breakers, ect...
Are there different tools for different types of chains? Between my dad/brothers and I, we have 5 bikes. It'd be handy to have that tool on hand.
Thanks!
Quote from: 2fs2nsHey guys,
What tool(s) are needed to install a chain? I've heard mention of a chain press, rivet tools, breakers, ect...
Are there different tools for different types of chains? Between my dad/brothers and I, we have 5 bikes. It'd be handy to have that tool on hand.
Thanks!
Well, it sounds like you need to read this article about chain replacement.......
http://www.motorcyclistonline.com/howto/breaking_motorcycle_chains/
As well as check out this tool.........
http://www.motionpro.com/motorcycle/tools/jumbo_chain_tool
Hmm, My dad ended up using a Dremel and a sledge. I think the chain breaker I got was a cheapie. I will check out the links and see what they say the "correct" way to do it is...
although 3 of the 4 bikes are shaft, so it doesn't come up too much.
Cool, thanks!
Dan check with Bob Barram he has the tool and is a pro at using it!
Yeah, I've been talking with him and I think I'm going to take him up on this time around.
I responded to the personal message as well but thought I would let all in on the news. I have an RK Excel cutter & press fit/rivet tool and am happy with it. The only other thing you need is a good wrench and some strong arms to use when breaking the link rivet. I recommend buying a good quality tool and make sure it has all the pieces needed to do the job.
I shopped around and found different lower prices with less equipment. I bought mine at cycle gear for $129 about a year ago. If you are into doing things yourself and have a chain it is a good investment unless you live within 50 miles of me! It is always available and a chain job can be completed in about and hour, unless Allen is timing it and then it will take about ten minutes!!!
Bob
I have the ProMotion chain tool and havr it down to five minutes LoL
Quote from: rjbThe only other thing you need is a good wrench and some strong arms to use when breaking the link rivet.
You do grind the heads off before you press the old links out right? Makes them a lot easier.
I will second something Bob said, do NOT try to skimp and buy a cheap tool. It is not worth it the aggravation because they might work fine on some smaller chain it will not work worth a crap on a 530 chain. Ask me how I know :roll:
What a laugh!!!!
How dya know, Jimmy?
Sorry I underated you Allen!!