Print Page - Double Banjo Bolt

Title: Double Banjo Bolt
Post by: kbob on March 23, 2008, 01:46:42 PM

Do any list members know where I can find a AN6-14 (MM-1.5) Double Banjo Bolt per the attached sketch or a single banjo that I can modify. I over torqued my oil mod banjo that was made from a single one. It lasted ten years but, I do not remember where I found it.I think it was from an aircraft supplier in Grapevine but, his shop is no longer there.
Bob Kennedy
972-933-3901

[attachment deleted by forum maintenance]

Title: Re: Double Banjo Bolt
Post by: roboto65 on March 23, 2008, 02:40:50 PM

You might try here https://www.truechoice.com/prodinfo.asp?number=ERL%209775DM
or here http://www.hydraulic-supply.com/html/productline/prodcat/banjo-fittings.htm
they may have them if not sure they could help you out !!!!!

Title: Re: Double Banjo Bolt
Post by: kbob on March 25, 2008, 09:02:57 AM

Thanks Allan,
I have email inquiries to both contacts

Magna Owners Of Texas

Public Forums => The Garage => Topic started by: kbob on March 23, 2008, 01:46:42 PM