Magna Owners Of Texas

Public Forums => The Garage => Topic started by: masterjml on February 03, 2011, 03:18:46 PM

Title: California Bike
Post by: masterjml on February 03, 2011, 03:18:46 PM
I think I have a California bike.  When i did the carbs there were a whole mess of hoses that seemed to run into other hoses that ran into little plastic devices from somewhere else.

Is there a way to check for certain?  serial # maybe?

Also, if it is indeed a Cali bike... can i take that extra stuff out? 

Title: Re: California Bike
Post by: Greg Cothern on February 03, 2011, 05:09:30 PM
Yep sounds like a Cali bike.

Unfortunately everyone I have ever known who has tried to remove all that mess, has ended up putting it back..  They never run right without the mess..
Title: Re: California Bike
Post by: Chad in Michigan on February 04, 2011, 06:38:09 AM
might want to check out the magna riders forum on Delphi. There are multiple members there that have removed most if not all of the cali stuff without a hitch. One guy knows all about it, i think he is on here too. his name is Chokse. edit: here's his info:  http://www.magnaownersoftexas.com/forums/index.php?action=profile;u=332
Title: Re: California Bike
Post by: dgc67 on February 04, 2011, 08:09:11 AM
I would bet my left, well, I would bet a lot that is a Cali bike.  My 1984 was and the carbs all had extra lines running to a charcoal canister.
Title: Re: California Bike
Post by: Chad in Michigan on February 04, 2011, 09:07:03 AM
Quote from: masterjml on February 03, 2011, 03:18:46 PM
I think I have a California bike.  When i did the carbs there were a whole mess of hoses that seemed to run into other hoses that ran into little plastic devices from somewhere else.

Is there a way to check for certain?  serial # maybe?

Also, if it is indeed a Cali bike... can i take that extra stuff out? 



As for serial #'s check this list to verify
Title: Re: California Bike
Post by: dgc67 on February 04, 2011, 10:47:48 AM
QuoteAlso, if it is indeed a Cali bike... can i take that extra stuff out?
as long as you properly block off the lines into the carbs you should be fine.  that or get a set of carbs off a non-cali model.
Title: Re: California Bike
Post by: Chokse on February 06, 2011, 11:46:38 AM
Yep.  Block off the metal tubes running into the cylinder heads (I removed the tubes and fabricated some covers for the openings in the cylinder heads).  Then, remove the hoses from the carbs and block off the 4 open tubes.  Also be sure to remove all the hoses and stuff under the tank and under the left carb side cover (except for the pre-air filter).  That should do it.  It will run just fine like that, but if you can score a set of non-Cali carbs on Ebay, do that.  They have different air jets inside and will make it run even better.