Magna Owners Of Texas

Public Forums => The Garage => Topic started by: magnaman567 on December 24, 2018, 05:25:46 PM

Title: 1984 v30 magna idling issue after carb rebuild
Post by: magnaman567 on December 24, 2018, 05:25:46 PM
i had posted askin for suggestions what could be causing high idle after cleaning the carbs , new lowjets, cleaning mainjets  all orifices etc and re sync etc. but still idled at 4500 rpm. couldnt adjust idle with black knob. .
  what could be causing this  ??
i went  and removed carbs again.today looked them over  . i  noticed the throttle wheel spring was  hooked in wrong place. thats why idle is high so  i moved it down about 1/4 inch and hooked it  right under where i had it hooked. and  put everything.back together. started right up idling better, i adjusted the cables a little an now it idles  normal   and starts on first try, no choke, needed..  , so after all the work i done cleaning everything and reassemble. now it runs better and is quicker  then its ever  been !! 
so i am happy now that i got er runnin right. the way I WANTED  it to run :) thanks everyone for your help and suggestions.   and Merry Christmas to everyone.!!!
yall a good group of guys  here  im proud to be a member. :)
Title: Re: 1984 v30 magna idling issue after carb rebuild
Post by: Jerry G Turner on December 24, 2018, 07:13:01 PM
Awesome glad you figured it out. 👍👍👍
Title: Re: 1984 v30 magna idling issue after carb rebuild
Post by: TLRam1 on December 24, 2018, 07:37:39 PM
Now you can enjoy the ride!

Always good to have an update and Merry Christmas to you!