Exhaust mod

[vonE]

Just wanted to say thanx for all the info on this site, just did the exhaust mod and love it, it is just what I was lookin for! I also changed out the sprockets to 17, 38 because I ride from Phoenix to San Diego most weeks, brought the rpms to 4100 at 75 seams to run well, i will change it this Dec when I am done playin Navy, to some thing more around town fun. I went with an avon rear tire  it seems like a decent enough tire, sticks well in the corners! Next project is to do the cam cap update to eliminate that upper end noise, that's driving me nutz!! Any way keep up the great info!!

[TLRam1]

Welcome aboard!  I guess you won't be attending a Texas wrench session anytime soon from AZ. Hang on before you do the mod as I don't think there's a mod to do on the 3rd generation Magna unless you invent one. Now, if I just saved you a lot of time you owe me!  

[vonE]

thanx, I Found a service bulletin from honda owners group for the 94 magna that addreses the upper engine knock. Texas isn't that far away!!

[Magnum Magna]

thanx, I Found a service bulletin from honda owners group for the 94 magna that addreses the upper engine knock. Texas isn't that far away!!

vonE Welcome to the MOOT.  I don't see the engine knocking bulletin.  Please post the link I would like to see it.

[vonE]

I will give it a shot, not very computer literate! I think I got it, just like email

[attachment deleted by forum maintenance]

[TLRam1]

I stand corrected! That looks pretty convincing as an original.

I will save that and include on the FAQ, if you don't mind, if you do talk to Curtis he splains things well. 

[roboto65]

If you did not buy the bike new then it may have been done there should be a mark somewhere on the bike seem to remember someone syaing something about a mark if the stealership fixed it! Ok found it on the bulletin should be a center punch after the Vin on the neck on the right side!!!

[lragan]

So was this knocking flaw fixed by Honda on models after '94?  Will my '96 be infected with it?

[Magnum Magna]

I will give it a shot, not very computer literate! I think I got it, just like email

Thanks I was not sure where to look for the little dimple to indicate that it has been done.

[roboto65]

This only applys to 94 3rd Gens

[lragan]

 

Thanks, Alan

[vonE]

 Hey, sorry  I took so long to reply, out doing a feild excersize, I bought the bike from the original owner, he says that he did not have it done and there is no mark next to the vin on mine, I will be takin a look at it mid march. just hope that it takes care of it.

[TLRam1]

Mine doesn't seem to make noise or I have worn it down and use to it. Didn't see a dimple, Mfg date 5-93.