Wrench Session Seagoville

TLRam1 · January 06, 2009, 02:35:13 PM

Quote from: KTC on January 06, 2009, 12:51:12 PM
Allen bringing DONUTS?

or doing....

roboto65 · January 06, 2009, 05:47:28 PM

It's a possibilty

Curtis_Valk · January 06, 2009, 09:44:37 PM

Quote from: claytl on January 06, 2009, 11:17:18 AM
I plan on being there. Prob bring the bike on a trailer. Still having trouble getting it started.

Larry

Look forward to meeting you, Larry.

Curtis

texas-ss-tornado · January 07, 2009, 10:19:58 AM

Looks like highs in the 70's on Friday, then back into the 50's on Saturday, guess I need to wear my overalls! What time are we going to start? I plan on being there early as possible, I figure tensioners are at least a 4 hour job, 8 if SmokedU helps much...........

Greg, can you post your address so I can make directions? Looking forward to meeting everyone!

rjb/AKA Bob Barram · January 07, 2009, 02:29:10 PM

I will be leaving from Frisco around 8 if anyone wants to come along. I usually meet folks at Home Depot East of Ohio on SH 121. You can call me at 972-801-7079 so I know who to meet. Come one, come all.
BTW, I will be electrified, since it will be cold to begin with. Dress warm!

rjb/AKA Bob Barram · January 07, 2009, 02:34:19 PM

I think I will be ready to wire my bike for LED accent lights. The switch has been installed, just need to mount and connect the LED pods. It should be an illuminating experience!!!!

Charles S Otwell · January 07, 2009, 08:39:54 PM

Hey Bob, we are headed for Celina Fri and I'll be needing your help to find a route down to Greg's.

texas-ss-tornado · January 07, 2009, 09:08:13 PM

I just posted the information on the cam chain tensioner replacement. Doesn't look hard, right?

http://www.magnaownersoftexas.com/forums/index.php?topic=2948.0

TLRam1 · January 07, 2009, 09:09:57 PM

Quote from: texas-ss-tornado on January 07, 2009, 09:08:13 PM
I just posted the information on the cam chain tensioner replacement. Doesn't look hard, right?

http://www.magnaownersoftexas.com/forums/index.php?topic=2948.0

Everyone bring chairs and gather round so we can watch you have fun!! Armchair quarterbacks!

roboto65 · January 07, 2009, 09:52:42 PM

MOOT will be representing for sure!!!!!!!!

Curtis_Valk · January 07, 2009, 10:07:55 PM

Quote from: rjb/AKA Bob Barram on January 07, 2009, 02:29:10 PM
BTW, I will be electrified, since it will be cold to begin with. Dress warm!

I got my Gerbings in the mail today, Bob. For $40 I got a 1.) Valk side cover with the dual heat-troller, control knobs and LEDs mounted in it 2.) a heated jacket liner 3.) heated socks and 4.) various assorted cords with SAE connectors including a coily cord.

I'm really not interested in the socks but I'll try them out anyway. I'll probably get some of the close-out Gerbings glove liners (old style). I saw them pretty cheap on one site. If I can keep my core and hands warm I think I'll be alright. What has been your experience?

Curtis

rjb/AKA Bob Barram · January 07, 2009, 10:15:11 PM

Curtis, sounds like you got a good deal. I have the dual thermostat and it is good to have when the body is warm but the extremeties (hands/socks) are cold. Bring your stuff along, I would like to see what you have.

Charles, if you guys can meet at Home Depot, I'm sure Ron knows where, we can go together. I just take 121 E to 75 and South to 635 and then E to 175 and east to Malloy Bridge road and Greg is behind Walmart. Let me know.

Smoked U · January 08, 2009, 03:17:55 PM

Quote from: texas-ss-tornado on January 07, 2009, 10:19:58 AM
Looks like highs in the 70's on Friday, then back into the 50's on Saturday, guess I need to wear my overalls! What time are we going to start? I plan on being there early as possible, I figure tensioners are at least a 4 hour job, 8 if SmokedU helps much...........

50 degrees, the high for the day. Yeah, I'll be wearing my fur lined underwear. I'll let you see them, but you gotta pay me $ 10.00 first.

Talk sweet so I can stay focused. You wouldn't want your cam chain dropped down in the case, hehehe

Smoked U · January 08, 2009, 03:29:20 PM

Quote from: TLRam1 on January 06, 2009, 01:08:14 AM
I had planned to come just didn't commit waiting to see if something came up.....well, something came up, Dave (SmokedU) is getting tired of hearing this .

Terry, I think I'll start a fund drive to raise money to have you stuffed when you finally pass on to the great twisty farm to market road in the sky.

We can keep you over at Greg's house in the closet, put some of those sneakers on you that have the skate wheels built in them and just roll you out in the garage "weekend at Bernie's" style for our get togethers. That way you won't have to miss any of them.

Might be a good idea to have your forearms extended, palms up with fingers bent, that way you can still participate as kind of a rack for holding things.

Well, maybe next time brother.

Smoked U · January 08, 2009, 03:56:45 PM

Quote from: texas-ss-tornado on January 07, 2009, 09:08:13 PM
I just posted the information on the cam chain tensioner replacement. Doesn't look hard, right?

http://www.magnaownersoftexas.com/forums/index.php?topic=2948.0

Baling wire, coat hangers and bears. Oh My!

You might need to bring a wire coat hanger. I think Greg used all of his to drive his guests out after the holidays.

Who's bringing the Valium?

Wrench Session Seagoville

Linked Events